Land


land mine clearance

Flail Assembly

Gearbox to drive the flail assembly of land mine clearance vehicle.

Application Details

Range N, Series 40, Ratio 2:1 bevel gearboxes selected。 The unit was selected for its compactness for mounting in the flail drive, however the unit needed greater power than the current designed unit。 Up rated gears designed and fitted to the unit。 Unit design also capable of great shock loads。

Products Used


M777 Howitzer Gearbox

M777 Howitzer

Two of the bevel gearboxes are power driven and the third is used as a hand wind facility, all units are used in the elevation of the gun, prior to its use。

Application Details

The Howitzer had been in development for over 3 years and a further 5 years working closely with BAE Systems (VSEL) to ensure that the units meet the design requirements. Developed with BAE with extensive testing and trials.

Three units are supplied per Howitzer, each one different, two are based upon the standard N35 gearbox design and the third is a bespoke design based around a set of N35 gears. Many different prototypes were manufactured and tested in vigorous terrain and weather conditions, each design slightly different until the final design was settled upon.


AS90 Gun Turret

AS90 Gun Turret

Controlled movement of gun turret utilising 8 gearboxes, 4 to control left movement and 4 to control right.

Application Details

High precision and repeatability required, along with high performance and low maintenance.

Range N, Series 35, Ratio 1:1 bevel gearboxes selected. Units built with minimal backlash to aid with the repeatability and high precision of movement required and filled with high quality lubricant, allowing units to be sealed for life. The compact design of the units kept the whole design into a minimal footprint allowing more room for operators of the turret.

Products Used


Defence-Power_Jacks_EMA_Linear_Actuator_Armoured_Vehicle_Rear_Door

Warrior Armoured Personnel Vehicle Rear Door

Actuation of the rear door of the British Army Personnel Vehicle.

Application Details

The door weighs 240kg, but at compound angles of 30° can weigh up to 2.6 tonnes.

Power Jacks 24VDC Electro-mechanical linear actuator, fitted with a ?25 x 25 ball screw and nut and 25:1 non reversible gear。 The unit is also fitted with a safety clutch and limit switches and suppressed to avoid radio interference。 The actuator can be submersed in water and has to be able to operate immediately whilst the vehicle is out of the water。


Air


Maintenance Platform

Aircraft Maintenance Platform

自建网站网赚Installation of a jacking system at RAF Brize Norton which lifts one of the levels of a aircraft maintenance platform up and down.

Application Details

自建网站网赚The jacking system consists of 5 x Special DE1811 E-Series machine screw jacks arranged in a “U” configuration with 2 x Neeter Drive Range-N 35-Series bevel gearboxes and 1 x 37-Series bevel gearbox. All driven by a 5.5kW electric motor.


Sea


UK Largest Aircraft Carrier

UK's Largest Aircraft Carrier

Linear motion and mechanical power transmission systems for the advanced weapon handling system for the Royal Navy’s CVF Queen Elizabeth class vessels。

Application Details

The HMWHS (Highly Mechanised Weapons Handling System) uses electro-mechanical handling technology to move pallets of munitions in the magazine and weapon preparation areas of the aircraft carrier.


Downloads

For the complete range of brochures, datasheets, videos and more go to the Downloads page

Brochures

Defence Industry Brochure
Lifting & Positioning Solutions for the Defence Industry(EN)
Request a Copy
Power at Work(EN)
PDF
疯狂斗牛 919网赚是真的不 网赚学院是真的吗 a6网赚兼职 博盈彩票登陆 广东快乐十分 2019年网赚做什么好 安徽11选5 贵州快3 2019年捞金网赚